Description
FreshWater Cover Shield is a wipe-on liquid that cleans, restores luster, and protects the vinyl exterior of your spa cover. One 16 oz bottle treats most full-size hot tub covers four or five times — typically a full year of maintenance applications, plus the initial two-coat treatment when you first apply it.
Your spa cover is the most expensive component on the outside of your hot tub. A quality replacement runs several hundred to over a thousand dollars, plus installation. And of all the things that shorten cover life, vinyl degradation from UV exposure is the worst — direct sunlight breaks down vinyl plasticizers over time, leaving the cover faded, brittle, and prone to cracking along stress points. Once vinyl cracks, water gets into the foam core. Once the foam absorbs water, the cover gets heavy, sags, and stops insulating. From there, replacement is the only fix.
Cover Shield does three things to slow that degradation:
- Cleans off accumulated dirt, dust, mineral residue, and environmental contamination from the vinyl surface
- Restores luster by replenishing surface plasticizers that wear away over time, keeping the vinyl supple
- Protects by laying down a UV-resistant water-repellent film that shields the vinyl from sunlight, rain, snow, and dust
For a few minutes of work two or three times a year, you significantly extend the useful life of an expensive component. The math on this product is straightforward: a single bottle costs a small fraction of even one replacement cover.
Pro Tip: The single most damaging thing for your spa cover isn’t sun, snow, or weight — it’s chlorine and bromine vapor trapped between the cover and the water surface. After every shock dose, leave the cover off (or propped open) for at least an hour while chlorine residual drops back to 5 ppm or below. Closing the cover over high-chlorine water concentrates corrosive vapor against the vinyl underside and destroys covers faster than any external weather can.
Brand
FreshWater®
Reviews
There are no reviews yet.